Skip to content

Free Shipping on orders $169.99!

Cart

Fast Shipping, Fair Prices & Best Customer Support!

All Your Favorite Brands, All in One Place!

Artist-Owned, Family Run

buyer guide

How to Choose Tattoo Cartridge Needles: Sizes, Tapers and Groupings

Walk into any shop and you'll hear artists talk in codes like 1207RLLT or 1011CM. Those codes tell you almost everything about a tattoo cartridge needle: how thick the needles are, how many there are, how they're grouped and how sharp the point is. Once you can read them, picking the right cartridge for lining, shading or color packing gets a lot easier.

This guide breaks down how to read cartridge codes, which groupings to use for which job, and how to build a starter set without wasting money on boxes you'll never open.

How to read a tattoo cartridge needle code

Most brands use the same format. Take 1207RLLT:

  • 12 is the needle diameter (#12, about 0.35mm)
  • 07 is the number of needles in the grouping
  • RL is the configuration (round liner)
  • LT is the taper (long taper)

Some brands write it as 35/07 RLLT instead, with the diameter in hundredths of a millimeter. It means the same thing.

Needle diameter (gauge)

Gauge Diameter Also called Typical use
#08 0.25mm Super bugpin Fine line, micro detail, soft realism
#10 0.30mm Bugpin Detail work, smooth blending, black and grey
#12 0.35mm Standard All-purpose lining, shading and packing
#14 0.40mm Large Bold lines that hold a lot of ink

Thinner needles make softer marks and finer detail. Thicker needles carry more ink and are faster for bold work. If you're not sure, #12 is the safe default. Want more on the small sizes? Read What is a bugpin tattoo needle?

Needle configurations

Round liner (RL)

Needles soldered tightly in a circle for crisp, solid lines. Small groupings like 01RL and 03RL handle fine line and detail; 07RL to 14RL pull bold outlines in one pass. Shop round liner cartridges.

Straight liner

A slightly looser grouping than a standard liner but tighter than a shader. Made for big, bold traditional lines in a single pass, like the Element Low Profile V2 straight liners.

Round shader (RS)

Needles grouped in a looser circle. Good for small fills, thick lines, dotwork and shading tight areas where a mag won't fit. Shop round shader cartridges.

Magnum (M1 or MG)

Two rows of needles side by side for covering larger areas. Great for color packing, solid black fill and shading. Shop magnum cartridges.

Curved magnum (CM, RM or SEM)

Also called round magnum or soft edge magnum. The needle tips follow a curve, so the outer needles hit lighter than the center. That gives softer edges, smoother blends and less skin trauma, which is why curved mags are the go-to for black and grey shading and color blending. Shop curved magnum cartridges.

Needle taper

Taper is how long the point of each needle is. A longer taper makes a sharper point that enters the skin more gently; a shorter taper drops more ink per pass.

  • Short or medium taper (ST, MT): more ink flow, faster saturation, good for color packing and bold work
  • Long taper (LT): the all-round choice for lining and shading
  • Extra long taper (XLT, ELT, SLT): the finest point, for soft gradients, realism and fine detail

Textured needles

Some liners come with textured needles, often marked with a T. The textured surface holds more ink, so lines go in solid with fewer passes.

Membrane and compatibility

Modern cartridges have a membrane inside that stops ink and fluids from flowing back into your machine. All the cartridges we carry are made for pen-style rotary machines and cartridge grips. Before you buy, check that the cartridge fits your machine or grip, and that your stroke length and needle depth suit the grouping. Big mags generally run better with a longer stroke.

Which cartridges to start with

If you're stocking a station from scratch, this covers most everyday work:

  • Lining: 1203RL for detail, 1207RL or 1209RL for bold outlines
  • Shading: 1207CM to 1215CM curved mags, plus a 1005RS or 1207RS for tight spots
  • Black and grey realism: bugpin curved mags in #10 for smooth, soft gradients
  • Color packing: 1209M1 to 1215M1 magnums, or curved mags if you want softer edges

Not sure which sizes you'll actually use? Try a mixed box of cartridges or a 5 pack before committing to full boxes of 20.

Cartridge brands at Element Tattoo Supply

We carry cartridges from the brands working artists trust, including Kwadron, Bishop Da Vinci V2, AVA Aqua, Peak Stellar, Mast Pro, Cheyenne and our own Element Low Profile cartridges. Browse them all in Tattoo Cartridge Needles.

Doing permanent makeup? PMU uses its own smaller, finer cartridges. See our PMU cartridge needles.

Quick FAQ

What does 1207RLLT mean?

A #12 (0.35mm) needle, 7 needles, round liner configuration, long taper.

Are curved magnums and round magnums the same?

Yes. Brands use CM, RM and SEM (soft edge magnum) for the same curved grouping.

What size cartridge should a beginner use?

Start with #12 long taper needles: a 1203RL and 1207RL for lines, plus a 1207CM and 1211CM for shading. They're forgiving and cover most work.

How many cartridges come in a box?

Most brands sell boxes of 20. Some, like AVA Aqua, also come in boxes of 10.

Previous Post Next Post

Leave A Comment

Please note, comments need to be approved before they are published.

Welcome to our store
Welcome to our store
Welcome to our store